DJI Inspire 2 Quadcopter Premium Combo
- DJI Zenmuse X5S 20.8MP 5.2K Micro Four Thirds MFT camera
- CineCore 2.0 Image Processing
- Supports CinemaDNG and ProRes Recording
- Dual-Battery Design
- Accelerates to 80kph in 4 Seconds
- Top speed of 180kph
- 6 direction FlightAutonomy obstacle sensing
- 2-Axis Stabilized FPV Camera
DJI X5S Camera, Apple ProRes, & CineDNG Features
Lossless Cinema RAW 5.2K 5280x2970 recording at 30 fps
The DJI Zenmuse X5S camera can record lossless Cinema RAW videos at massive maximum bitrates in either 5.2K, 4.2Gbps, 12-bit video at up to 29.97p; or Ultra High Definition (UHD) 4K, 3.6Gbps, 12bit video at up to 47.95p. The massive bitrates keeps original data intact, giving you complete control to edit every single frame in post as a RAW file.
120 fps recording in 1920×1080 Full HD
The DJI Zenmuse X5S can also capture videos at fast frame rates of 120fps in Full HD. The faster frame rates will enable you to slow down recordings by up to 5 times without producing choppy/jumpy videos.
12.8 stops of dynamic range
The new X5S camera's larger sensor provides a wide dynamic range of 12.8 stops. This means that the camera can record more shades of colours and will capture more detail in bright highlights and dark shadows before blowing colours out.
Exceptional low light performance
Exceptional low light video recording is made possible by the super-fast F/1.7 included lens and sensor light sensitivity of ISO 100-25600. This enables capturing low light scenes such as nightscapes with little to no noise
20.8 megapixel camera with RAW image capture
The X5S camera features a picture resolution of 20.8 megapixels and an amazing image ISO range of ISO 100 – 25600. The camera can also capture 12-bit RAW images for even greater image control during post production.
3-axis stabilising gimbal
A new 3-axis gimbal stabilises the camera of the Zenmuse X5S. The new gimbal has been highly optimised to support the new camera and lens and has a pinpoint-precise motor rotation with a control accuracy of ±0.01° that is powered by a dedicated processor.
20 fps DNG RAW burst and lossless In-video photo capture
When used with a DJI CINESSD, the X5S can capture 20.8 megapixel DNG RAW stills at a fast continuous rate of 20 frames per second. When using only an microSD card, 20.8MP JPEG+DNG stills can be captured at 14fps. Stills can also be taken during video recording without stopping recording.
Micro four thirds is a largely popular lens mount/type making several lens options available for the X5S. At time of writing there is officially only 8 lenses supported by the camera and gimbal, but DJI, along with third party lens companies are planning to make more supported lenses available. Additionally, the lens mount on the X5S is an Active MFT that supports autofocus. The official supported lenses (at time of writing) can be found below.
- DJI MFT 15mm/1.7 ASPH (With Balancing Ring and Lens Hood)
- Panasonic Lumix 15mm/1.7 (With Balancing Ring and Lens Hood)
- Panasonic Lumix 14-42mm/3.5-5.6 HD
- Olympus M.Zuiko 12mm/2.0 (With Balancing Ring)
- Olympus M.Zuiko 17mm/1.8 (With Balancing Ring)
- Olympus M.Zuiko 25mm/1.8
- Olympus M.Zuiko 45mm/1.8
- Olympus M.Zuiko 9-18mm/4.0-5.6
DJI Inspire 2 Quadcopter Features
6 direction FlightAutonomy obstacle sensing system with stable hover
The DJI Inspire 2 features the most advanced FlightAutonomy obstacle avoidance system in any DJI Drone with 6 directions including top obstacle avoidance. This obstacle avoidance system is made up from a complex network of components including infrared sensors, the primary camera, dual-band satellite positioning (GPS and GLONASS), and computing cores.
The new infrared sensing systems sensors with a field of view of 60° and 54°, and a maximum range of 7m, provides a wide view of the scene around the Inspire 2. These infrared systems replaced the traditional ultrasonic sensors because they only have a detection range of 3-5m and may be confused when affected by propeller vibration or when sensing uneven surfaces.
Together all these components renders an accurate 3D environment (up to 30m) around the Inspire 2 and monitors critical data and rule out possible errors so it can react to its surroundings. This obstacle avoidance system works both in outdoor and indoor environments and is activated in every Intelligent Flight Mode including all ActiveTrack modes, TapFly and Terrain Follow. Additionally these technologies also makes the Inspire 2 hover with incredible stability. FlightAutonomy is also available during automatic Return to Home, and the drone will follow its flown path back while dogging obstacles to return safely in case of a lost connection or low battery.
ActiveTrack subject follow and framing with 3 modes
The DJI Inspire 2 features the same ActiveTrack follow modes found in its Phantom 4 drones. Activetrack successfully makes autonomous/automatic follow recording a reality. Whether you or your subject are running, cycling, skating, skiing, driving, the system uses an advanced combination of computer vision, object recognition, gesture support and machine learning to track as your subject moves. Circling a moving object and keeping it in frame used to only be achievable by the most confident of pilots, now thanks to completely autonomous following and blistering flight speeds everyone can do it. A new algorithm also recognizes more subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots. New ActiveTrack flight modes opens new creative tracking including Trace, a follow mode behind or in front of a subject; Profile, for tracking alongside a subject at a variety of angles to get profile shots of the subject; and Spotlight, a mode that keeps the camera trained on a subject while the aircraft flies almost anywhere. The entire time ActiveTrack is running obstacle avoidance is too, so it will decide whether it should continue following, avoid an obstacle or simply stop.
On-board 5.2K video processer with RAW video recording and SSD storage system
Integrated into the Inspire 2 is a new CineCore 2.0 image processing system, capable of processing 5.2K videos in CinemaDNG, Apple ProRes, and is capable of storing files in DJI's CINESSD storage system. By placing these parts inside the airframe, image data can be stored and processed more readily, while the CINESSD storage system itself can be better protected. It also means that the camera can be more lightweight, increasing aircraft agility and overall flight performance.
Increased agility, 2kg thrust per rotor, and top speed of 108kph
The Inspire 2 comes with new 15-inch propellers and motors that delivers 2kg of thrust, capable propelling the Inspire 2 at a sports car equivalent 0-80kph time of just 4 seconds. As every increment in speed creates new challenges, many technological hurdles were overcome to realize the Inspire 2’s 108kph top speed. This required the creation of a finely tuned propulsion system, redesigned motors with a 3° camber angle for more stable pitch, roll and yaw as well as an advanced flight control system, air resistance reduction, and stability enhancement. Additionally, its advanced fast-acting flight control system allows the Inspire 2 to descend at a rapid 9m/s.
Rigid and lightweight carbon fiber and magnalium construction
With more flight power and lager cameras the Inspire 2 needs a rigid structure that still maintains a low weight. Dji overcame this problem by using a lightweight magnalium shell, and carbon fiber “T” junction airframe connections.
Front-facing 2-Axis FPV CameraThe front of the Inspire 2 features a 2-axis gimbal stabilized global shutter FPV camera. This is not the primary/main recording camera, but displays the front of the drone so users can control the drone better when the main camera is not facing frontwards. The camera has a controllable pitch range of 0° to -60°, and its video feed transmits along with the feed from the primary camera to the DJI GO app, so both operator and camera operator can get the view they need to capture complex shots. DJI GO can be used to switch between different views, while both master and slave controller feeds maintain the same video quality, giving both pilot and camera operator a better overall experience.
Less obtrusive propeller arms design
The propeller arms of the Inspire 2 acts as a landing gear when landing/taking off and moves up when in flight; greatly reducing the chances of the camera recording the propellers and ruining your video or image.
You dont have to manually fly the Inspire 2 with the control sticks, TapFly takes over all of these controls for you leaving you to focus on your shot. Using TapFly mode, all you have to do to is tap on the screen of your smartphone or tablet and the drone will fly there. To change the direction of flight, you can simply tap the screen to fly anywhere. Using its Flight Autonomy Obstacle Sensing System, the DJI Inspire 2 can fly places you might not have gone before, to create dynamic and inspiring footage.
Auto-return home with FlightAutonomy and landing terrain detection
The DJI Inspire 2 features the same failsafe auto-return home feature found in previous models but now also integrates FlightAutonomy with landing terrain detection. The system is completely autonomous and will automatically return to the exact spot it took-of if it detects that the battery is running low, connection to the controller is lost or if the return home button is pressed. The drone will follow the exact flown path back with the FlightAutonomy obstacle sensing system to safely guide the drone past moving/moved obstacles and will scan the landing area to see if it is safe.
Dual band 7 km control and live view range
The DJI Inspire 2 features a dual band remote controller featuring a whopping 7km range. The dual band frequencies covers 2.400-2.483 GHz, and 5.725-5.850 GHz; the frequencies can manually be switched to provide better connection based on your surroundings.
Powered by 2 batteries for a 27 minute flight time
The DJI Inspire 2 is powered by two 6000mAh batteries to give the drone a flight time of up to 27 minutes with the X4S gimbal camera attached. The dual battery system does not just provide a longer flight time; but also a failsafe return to home if one battery should fail, as well as a 70W self-heating system.
Extreme Weather Durability – 70W self-heating system
Each battery in the Inspire 2 features a 70W self-heating system capable of heating itself to 5°C every minute to enable safe flight in extremely cold conditions. Additionally, the heating system increases the maximum flight height to 5000m above sea level when using the optional high altitude propellers.
The DJI Go 4 app also features a flight simulator to practice your flying skills.
The ‘Director’ feature automatically edits shots into short videos that can be shared immediately after landing.
Easy camera adjustments
All the camera settings, including ISO, shutter speed, focus and exposure compensation, can be set using the DJI Go 4 app.
Attitude algorithms of the Inspire 2 have been comprehensively improved, increasing the sensitivity of the control sticks, so that pilots can fly with greater precision. Flight parameters can now also be adjusted in the DJI GO 4 app, giving pilots the ability to tune the Inspire 2 to fly the way they need it to. Tripod Mode also comes to the Inspire 2, for ultra-fine flying or slow graceful movements.
Precision Gimbal Control
Three damping balls and a damping board weighing just 40g — half the weight of previous damping boards — increase the damping capabilities of the Inspire 2 gimbal. Gimbal movement can now be customized through parameter settings built into DJI GO, giving operators the control they need to get the desired shot. A new gimbal control system increases control precision up to 0.01°, and is also powerful enough to carry an equivalent 90mm long lens. The new attitude controlled design allows the gimbal to automatically keep level, significantly reducing the likelihood of tilted horizons. The gimbal also has a new Follow Mode, which links the direction of the gimbal to the master controller, giving it the same control experience as the slave controller.
Broadcast streaming mode
The Inspire 2 features a new Broadcast Mode for TV broadcasters, allowing videos to be streamed from the Inspire 2 in broadcast standard 720p60 or 1080i50. Once connected to broadcasting equipment, footage can be sent live on-air without signal conversion. Additionally, while pilots maintain a real-time view of the flight, a short delay has been added to the optimized HDMI output, offering smoother playback and more stable frame rates.
- DJI Inspire 2 Quadcopter
- Remote Control (Transmitter)
- 4 x Propeller Pairs
- 2 x Intelligent Flight Battery
- Battery Charger
- Charging Hub
- Power Cable
- USB Cable
- microSD Card
- Vision System Calibration Plate
- 3 x Gimbal Damper
- Propeller Mounting Plates
- Carrying Case
- 4 x Battery Insulation Sticker
- DJI Zenmuse X5S Micro Four Thirds Camera and Gimbal
- 15mm f/1.7 prime lens
- Front Lens cap
- Rear lens cap
- Body cap
- Pre-installed Apple ProRes & CineDNG keys
DJI Inspire 2 Specs:
Aircraft (Model: T650)
|Weight||7.25 lbs (3290 g, including two batteries, without gimbal and camera)|
|Diagonal Distance(propeller excluded)||18 inch (605 mm, Landing Mode)|
|Max Takeoff Weight||8.82 lbs (4000 g)|
|Max Takeoff Sea Level||1.55 mi (2500 m); 3.1 mi (5000 m with specially-designed propeller)|
|Max Flight Time||Approx. 27 min (with Zenmuse X4S)|
|Max Tilt Angle||P-mode: 35° (Forward Vision System enabled: 25°); A-mode: 35°; S-mode: 40°|
|Max Ascent Speed||P-mode/A-mode: 16.4 ft/s (5 m/s); S-mode: 19.7 ft/s (6 m/s)|
|Max Descent Speed||Vertical: 13.1 ft/s (4 m/s); Tilt: 13.1-29.5 ft/s (4-9 m/s) Default tilt is 13.1 ft/s (4 m/s), can be set in-app.|
|Max Speed||67 mph (108 kph)|
|GPS Hovering Accuracy||Vertical: ±1.64 feet (0.5 m) or ±0.33 feet (0.1 m, Downward Vision System enabled) Horizontal: ±4.92 feet (1.5 m) or ±0.98 feet (0.3 m, Downward Vision System enabled)|
|Operating Temperature||-4° to 104° F (-20° to 40° C)|
Downward Vision System
|Velocity Range||<32.8 ft/s (10 m/s) at height of 6.56 feet (2 m)|
|Altitude Range||<32.8 feet (10 m)|
|Operating Range||<32.8 feet (10 m)|
|Operating Environment||Surfaces with clear patterns and adequate lighting (> 15 lux)|
|Ultrasonic Sensor Operating Range||0.33-16.4 feet (10-500 cm)|
|Ultrasonic Sensor Operating Environment||Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance)|
Upward Infrared Sensor
|Obstacle Sensing Range||0-16.4 feet (0-5 m)|
|Operating Environment||Large-size non-reflective obstacles|
Charger (Mode: IN2C180)
|Rated Power||180 W|
Charging Hub (Mode: IN2CH)
|Input Voltage||26.1 V|
|Input Current||6.9 A|
|Angular Vibration Range||±0.01°|
|Controllable Range||Pitch: -130° to+40°; Roll: ±20°; Pan: ±320°|
|Max Controllable Speed||Pitch: 90°/s; Roll: 90°/s; Pan: 90°/s|
Forward Vision System
|Obstacle Sensing Range||2.3-98.4 feet (0.7-30 m)|
|FOV||Horizontal: 60°; Vertical: 54°|
|Operating Environment||Surfaces with clear patterns and adequate lighting (> 15 lux)|
|Operating Frequency||2.400-2.483 GHz; 5.725-5.850 GHz|
|Max Transmitting Distance||2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC)|
|(unobstructed, free of interference)||5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC)|
|EIRP||2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC) 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC)|
|Battery||6000mAh 2S LiPo|
|Output Power||9 W (Not supply power for mobile device)|
|USB Supply Power||iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max)|
|Operating Temperature||-4° to 104° F (-20° to 40° C)|
Intelligent Flight Battery (Mode: TB50-4280mAh-22.8V)
|Battery Type||LiPo 6S|
|Net Weight||515 g|
|Charging Temperature||41° to 104° F (5° to 40° C)|
|Operating Temperature||-4° to 104° F (-20° to 40° C)|
|Max Charging Power||180 W|
DJI X5S Specs:
|Supported Lens||DJI MFT 15mm/1.7 ASPH (With Balancing Ring and Lens Hood)
Panasonic Lumix 15mm/1.7 (With Balancing Ring and Lens Hood)
Panasonic Lumix 14-42mm/3.5-5.6 HD
Olympus M.Zuiko 12mm/2.0 (With Balancing Ring)
Olympus M.Zuiko 17mm/1.8 (With Balancing Ring)
Olympus M.Zuiko 25mm/1.8
Olympus M.Zuiko 45mm/1.8
Olympus M.Zuiko 9-18mm/4.0-5.6
Effective Pixels: 20.8MP
|FOV||72° (with DJI MFT 15mm/1.7 ASPH )|
|Photo Resolutions||4:3, 5280×3956
23.976/24/25/29.97p,12-bit,up to 4.2Gbps
23.976/24/25/29.97/47.95p,12-bit,up to 3.6Gbps
23.976/24/25/29.97p @80Mbps 47.95/50/59.94p @100Mbps
23.976/24/25/29.97p @60Mbps 47.95/50/59.94p @80Mbps 119.88p @100Mbps
23.976/24/25/29.97p @65Mbps 47.95/50/59.94p @80Mbps
23.976/24/25/29.97p @50Mbps 47.95/50/59.94p @65Mbps 119.88p @100Mbps
|Operation Modes||Capture, Record, Playback|
|Still Photography Modes||Micro SD: Single shot, Burst Shooting:
3/5/7/10/14 frames, Auto Exposure Bracketing, 3/5 bracketed frames at 0.7EV bias, Timelapse
SSD: RAW Burst Shooting:
|Exposure Mode||Auto, Manual, Shutter, Aperture|
|Exposure Compensation||±3.0 (1/3 increments)|
|Metering Mode||Center-weighted metering,
Spot metering (area option 12x8)
|Electronic Shutter Speed||8-1/8000s|
|White Balance||Auto, Sunny, Cloudy, Incandescent,
Neon Custom (2000K–10000K)
|ISO Range||100 – 6400 (Video)
100 – 25600 (Stills)
|Anti-Flicker||Auto, 50Hz, 60Hz|
|Angular Vibration Range||±0.01°|
|Controllable Range||Tilt: +30°to -90°, Pan: ±320°|
|Mechanical Range||Tilt: +50°to -140°, Pan: ±330°, Roll: +90° to +30°|
|Max Controllable Speed||Tilt: 90°/s, Pan: 90°/s|
|Operating Temperature||14°–104°F (-10 to 40℃)|
|Storage Temperature||-4°–140°F (-20 to 60℃)|
PRODUCT WARRANTY INFORMATION
1. What warranty comes with the goods purchased ?
All products excluding batteries sold by Orms are covered by a minimum of a one year local warranty, reckoned from the date of purchase, to protect you against manufacturing defects.
Canon IXUS, PowerShot compact cameras are covered by a full 1 Year Warranty
Canon DSLR and Mirrorless cameras are covered by a full 2 Year Warranty.
Canon video cameras including Legria and X-series are covered by a full 1 Year Warranty.
Nikon compacts excluding the Coolpix P900 are covered by a full 1 Year Warranty.
Nikon DSLR's including the CoolPix P900 and are covered by a full 2 Year Warranty.
Panasonic cameras and lenses are covered by a full 2 Year Warranty.
Fujifilm cameras are covered by a 2 Year Warranty.
SIGMA & TAMRON LENSES
Sigma and Tamron products are covered by a 3 Year Warranty.
LEXAR & SANDISK MEMORY CARDS
Lexar and Sandisk memory cards are covered by a Limited Lifetime Warranty.
Lowepro's Limited Original Owner Warranty covers defects in materials and workmanship during the useful life of the product. The warranty does not cover damage caused by improper care.
USED GEAR PURCHASED FROM ORMS
All used gear sold by ORMS is supplied with a 6 Month Warranty.
2. My product has gone faulty, now what ?
Please contact our service division straight away on 021 - 469 1962 and notify them of the fault. You may also e-mail them at firstname.lastname@example.org
1. If a product is defective / faulty, ORMS will replace the product within a 10 day period deemed from the date of receiving the product. ORMS will also cover the shipping costs within the borders of South Africa.
2. During the warranty period, Orms will arrange collection of the faulty item, facilitate the repair and then ship the product back to the customer, bearing all risks and costs.
Orms is not obliged to repair products that fall outside of the manufacturers warranty period, or products that are damaged accidentally, however Orms in seeking to deliver the highest standard of customer service will gladly assist the customer in having the product repaired via the network of repair agents with which Orms has business dealings.
1. FREE Standard Shipping
Free Economy Shipping is available on all orders exceeding R1 000. (T&C's apply)
*Terms and conditions to qualify for free shipping:
- Shipping may only be to a physical address within the borders of South Africa. No P.O Box's allowed.
- Shipping to outlying or remote areas like farms and game reserves may attract an additional fee.
- The delivery time to city areas is usually between 2 and 4 working days*. This excludes weekends and public holidays.
*Reckoned from time of dispatch to time of arrival to client. This is an estimate and not guaranteed.
2. Aramex Courier Service (local)
We use Aramex couriers as our preferred method of delivery.
With sophisticated track and trace equipment, you can pinpoint exactly where your parcel is, from the moment it is dispatched by us, until it's safely handed over to you the recipient.
Your parcel is well packaged and bubble wrapped before delivery. We also fully insure your parcels contents for the journey to your door.
We charge a flat-rate for shipping and the charges are per order.
- Express Shipping to Main Cities @ R 150.00 incl. VAT (ETA of 1-2 Business Days)* - Main Cities are: Cape Town, Johannesburg, Pretoria, Durban, Port Elizabeth and East London. Other cities/towns will take more than 1-2 delivery time.
- Standard Shipping @ R 80.00 incl. VAT (ETA of 2-4 Business Days)* - To all areas.
*Reckoned from time of dispatch to time of arrival to client. This is an estimate and not guaranteed. This period does not include Saturdays, Sundays and public holidays. The base price of R80.00 incl. VAT is for a parcel up to 10kg in Volumetric and Physical weight. Should the item/s exceed this weight, we reserve the right to increase the shipping charge accordingly.
Please Note: The above prices quoted are for ordering online through the ORMSdirect website only. A different rate will be quoted if handled manually through our camera sales department. Our delivery service only runs from Monday to Friday. Saturday morning deliveries can be done by special arrangement only and at an additional charge. Please contact email@example.com to arrange. We reserve the right to re-quote the delivery fee should this become too expensive.
3. DHL Express Courier Service (International)
International orders are generally subject to local import duties and taxes (VAT)
Orms is not responsible for, nor can we offer, any specific advice regarding any customs related fees that you may incur. For specific information, please consult with your local government import office.
Privacy: Your privacy is important to us. We strive to exceed your expectations for privacy. Cross-border shipments are subject to inspection by customs authorities. We may also be called upon to provide certain order, shipment, and product information to our international carriers. Carriers may communicate such information to customs authorities for the purpose of facilitating customs clearance and compliance with local laws.
International shipments are quoted on a per order basis depending on the size and weight of the parcel shipped.
4. Collect & Collect from Orms Shop in Cape Town / Bellville
You are welcome to place your order online, pay for it and collect it from our Cape Town or Bellville branches. You will need to bring in a print out of the order for collection. Please ask for online sales on arrival.
Orms Shop - Cape Town
Shop 5, Roeland Square
Upper Canterbury Street
Gardens, Cape Town, 8001