FREE SHIPPING
Free shipping on all South African orders above R1000
Using the PocketWizard Power ST4 for Elinchrom RX can give you near-total remote control over all your Elinchrom RX strobes -- with either the MiniTT1 Transmitter or FlexTT5 Transceiver (both optional, use of one is required) on your camera and a PowerST4 plugged into your Elinchrom RX flash, you can now change flash power settings directly from your camera position. Use the PowerTracking function and when you change ISO or aperture, the lights automatically adjust their power setting.
By adding the optional AC3 ZoneController, you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. HyperSync gives you the ability to sync at up to 1/8000s at full power (depending on your flash and camera). Total control (over your lights, anyway) is yours!
ControlTL
PocketWizard's new firmware platform taps into the full potential of your camera and flash system enabling an entirely new level of remote flash capability through our proven radio communications. ControlTL firmware is configurable and upgradeable for "future-proof" continuous improvement.
Manual Power Control
When the PowerST4 is paired with either the MiniTT1 or FlexTT5 (both optional) on camera, you can adjust the power settings of your Elinchrom RX lights from the camera's position either with the Flash Exposure Compensation dial or add the (optional) AC3 ZoneController for three zones of power control.
ZoneControl
Use either the AC3 ZoneController or a MultiMAX radio (both optional) to control up to three zones of light with as many lights in each zone as you want. Use the A-B-C zone switch on the PowerST4 to assign the zone.
PowerTracking
Any change in ISO or aperture is automatically compensated for in your flash power settings. Set your (optional) AC3 ZoneController to manual and PowerTracking is turned off for absolute manual control.
Channels/Learn Mode:
The PowerST4 can be programmed as needed with up to 20 ControlTL channels for Manual Power Control, or 32 standard channels for simple triggering. Channels can be configured with the PocketWizard Utility (free downloadable software), the Learn function from another PocketWizard radio, or the reset function to configure back to factory settings.
Reverse Compatible
The PowerST4 Receiver operates on the same channels as all other PocketWizard radios and will work with any PocketWizard radio you may already have.
Low-Profile Design
The PowerST4 is tiny and simply plugs into the remote socket on an Elinchrom RX flash. Note: Ranger RX requires EL-19374 EL Skyport Transceiver RX Adapter.
No Batteries Required
The PowerST4 gets its power from the flash.
HyperSync
HyperSync allows photographers to achieve faster X-sync speeds, all the way up to 1/8000 second*, will full power flash. Now you can cut the ambient light and use wide-open apertures, outdoors in bright sunlight. That extra speed can also freeze action, whether shooting models or athletes in motion. HyperSync works with both TTL speedlites and full size studio flash. All you need is a MiniTT1 or FlexTT5 (both optional) on-camera that has been tuned to your specific camera via the PocketWizard Utility. (*camera and flash model dependent)
Programmable and Upgradeable
Use the PocketWizard Utility with the PowerST4's USB port to program the receiver to any PocketWizard channel and zone. You can also program your initial power settings, modeling light settings and beeper settings using the Utility. The PowerST4 can be easily upgraded whenever updates and feature enhancements are available.
PocketWizard Power ST4 for Elinchrom RX
Frequency: | CE model: 433.42 - 434.42 MHz EU/Asia/Other |
Channels: | 52 Channels over 26 Frequencies - FCC/IC |
Antenna: | 2.7" (6.9 cm) rubberized |
Mounting: | Five-pin remote socket |
Zone Select Switch: | A-B-C |
Status Indicator: | LED: Green, Amber, Red Status indications |
USB: | USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground |
Operating temperature: | Above -15° C (5° F) and below 50° C (120° F) |
Storage | Above -30° C (22° F) and below 85° C (185° F) |
Construction: | High impact plastic, rubberized antenna |
Power: | Receives power from attached flash |
Dimensions: | 3.6" (9.2cm) long x 2.2" (5.5 cm) wide x 1" (2.5 cm) tall |
Weight: | .77 ounces (21.83 grams) |
Included in the box: | PowerST4 Receiver, Quick Guide |
RoHS Compliant |
|
Requirements: | Must be used in conjunction with a MiniTT1 or FlexTT5 on camera for power control capability. May be paired with any PocketWizard transmitter or transceiver for simple triggering. |
All products excluding batteries sold by Orms are covered by a minimum of a one year local warranty, reckoned from the date of purchase, to protect you against manufacturing defects.
Canon IXUS, PowerShot compact cameras are covered by a full 1 Year Warranty
Canon DSLR and Mirrorless cameras are covered by a full 2 Year Warranty.
Canon video cameras including Legria and X-series are covered by a full 1 Year Warranty.
Nikon compacts excluding the Coolpix P900 are covered by a full 1 Year Warranty.
Nikon DSLR's including the CoolPix P900 and are covered by a full 2 Year Warranty.
Panasonic cameras and lenses are covered by a full 2 Year Warranty.
Fujifilm cameras are covered by a 2 Year Warranty.
Sigma and Tamron products are covered by a 3 Year Warranty, which only applies to when registering your Tamron/Sigma product.
Lexar and Sandisk memory cards are covered by a Limited Lifetime Warranty.
Lowepro's Limited Original Owner Warranty covers defects in materials and workmanship during the useful life of the product. The warranty does not cover damage caused by improper care.
All used gear sold by ORMS is supplied with a 6 Month Warranty.
All refurbished gear sold by ORMS is supplied with a 12 Month Warranty.
Please contact our service division straight away on 021 - 469 1962 and notify them of the fault. You may also e-mail them at repairs@orms.co.za
1. If a product is defective / faulty, ORMS will replace the product within a 10 day period deemed from the date of receiving the product. ORMS will also cover the shipping costs within the borders of South Africa.
2. During the warranty period, Orms will arrange collection of the faulty item, facilitate the repair and then ship the product back to the customer, bearing all risks and costs.
3. Please see our policies under Return Policy and Servicing & Repair Policy for further information
Orms is not obliged to repair products that fall outside of the manufacturers warranty period, or products that are damaged accidentally, however Orms in seeking to deliver the highest standard of customer service will gladly assist the customer in having the product repaired via the network of repair agents with which Orms has business dealings.
Free Economy Shipping is available on all orders exceeding R1 000. (T&C's apply)
*Terms and conditions to qualify for free shipping:
*Reckoned from time of dispatch to time of arrival to client. This is an estimate and not guaranteed.
We use DawnWing couriers as our preferred method of delivery.
With sophisticated track and trace equipment, you can pinpoint exactly where your parcel is, from the moment it is dispatched by us, until it's safely handed over to you the recipient.
Your parcel is well packaged and bubble wrapped before delivery. We also fully insure your parcels contents for the journey to your door.
We charge a flat-rate for shipping and the charges are per order.
*Reckoned from time of dispatch to time of arrival to client. This is an estimate and not guaranteed. This period does not include Saturdays, Sundays and public holidays. The base price of R80.00 incl. VAT is for a parcel up to 10kg in Volumetric and Physical weight. Should the item/s exceed this weight, we reserve the right to increase the shipping charge accordingly.
Please Note: The above prices quoted are for ordering online through the ORMSdirect website only. A different rate will be quoted if handled manually through our camera sales department. Our delivery service only runs from Monday to Friday. Saturday morning deliveries can be done by special arrangement only and at an additional charge. Please contact info@orms.co.za to arrange. We reserve the right to re-quote the delivery fee should this become too expensive.
Please note:
International orders are generally subject to local import duties and taxes (VAT)
Orms is not responsible for, nor can we offer, any specific advice regarding any customs related fees that you may incur. For specific information, please consult with your local government import office.
Privacy: Your privacy is important to us. We strive to exceed your expectations for privacy. Cross-border shipments are subject to inspection by customs authorities. We may also be called upon to provide certain order, shipment, and product information to our international carriers. Carriers may communicate such information to customs authorities for the purpose of facilitating customs clearance and compliance with local laws.
International shipments are quoted on a per order basis depending on the size and weight of the parcel shipped.
You are welcome to place your order online, pay for it and collect it from our Cape Town or Bellville branches. You will need to bring in a print out of the order for collection. Please ask for online sales on arrival.
Shop 5, Roeland Square
Upper Canterbury Street
Gardens, Cape Town, 8001
South Africa
> View on Google Maps: ORMS C.T
Ground Floor, Tygervalley Chambers 2
27 Willie van Schoor Avenue
Bellville, Cape Town, 7530
South Africa
Free shipping on all South African orders above R1000
Contact us 24 hours a day, 7 days a week
Giving our customers peace of mind
We ensure secure payment with PEV