Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone
Choose PayGate at checkout for MobiCred Payments.
- Mobile Journalist, Vlogger, Run & Gun
- For Cameras and Mobile Devices
- Internal 51-Hour Rechargeable Battery
- Stepless Gain Knob, Bass Roll-Off Switch
- Auto-Configuring 3.5mm TRRS Output
- Power Switch with LED & Auto On/Off
- Low Noise & Distortion, High SNR
- Lightweight Body, Low-Reflection Finish
- Detachable Shoe/Pole/Tripod Shockmount
- Includes Cables & Windscreen
Orms Bellville
Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone
Orms Bellville
Ground Floor, Tygervalley Chambers 2, 27 Willie Van Schoor Avenue
Bellville
Bellville
Western Cape
7530
South Africa
The Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone provides notably improved performance over the built-in microphones in your camcorder, mobile phone, and other recorders. Featuring directional audio capture as well as adjustable gain and filtering.
The Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone provides broad device compatibility for vloggers, YouTubers, or the run-and-go videographers, as well as directional audio capture.
A built-in microprocessor automatically configures its TRRS connector to work with most 3.5mm mic input. The stepless knob at the mic's bottom provides up to 20dB of gain for easy optimisation of levels. Attaching the mic to the boompole or the tripod is as easy as using the supplied Rycote adjustable shock mount and 3.5mm TRRS coiled cable.
You Should Know
Some TRS-equipped cameras from Blackmagic, Fuji, and Olympus require a 3.5mm TRS cable (available separately) for operational compatibility. Plug-in power (bias voltage) is required to turn on the V-Mic D3 Pro.
Auto-Configuring 3.5mm Connector
The Deity Microphones V-Mic D3 employs a microprocessor the auto adapts the 3.5mm TRRS connector to work with most microphone jacks.
Stepless Gain Knob
Featuring a stepless analog gain dial. The 20dB gain is added on a liar scale, so you can dial in the precise amount of gain needed.
Selectable Low-Cut Filtering
Attenuate low-frequency rumble with the V-Mic D3 Pro's low-cut filter, selectable at 75 Hz or 150 Hz. Rather than using a sunken switch that requires a pointed object to flip, the V-Mic D3 Pro opts for a single top-mounted button.
Low-Noise Electronics
Thanks to the 14mm condenser capsule and low-noise, low-distortion electronics, the V-Mic D3 provides clean audio with a high signal-to-noise ratio, which means less time spent in post-production processing your tracks with noise-reduction software.
Long Battery Life
Running on a single AAA battery (alkaline AAA provides up to 166 hours of runtime, a lithium AAA battery provides up to 208 hours).
The mic features a single on/off switch, and the microphone automatically runs in standby mode till the attached camera is turned on, this is to save battery life in standby mode.
Convenient Accessories
The Deity Microphones V-Mic D3 features a Rycote shockmount designed to reduce vibration noise from entering the capsule as well as a foam windscreen reducing outside noise from entering the capsule while recording audio..
- Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone
- Rycote Lyre Adjustable Shoe Shockmount
- Smart 3.5mm TRRS Coiled Cable
- USB Charging Cable
- Foam Windscreen
Microphone
Primary Applications | Audio for Video, Location Sound |
Form Factor | Stand/Boom Mount |
Intended Sound Sources | Vocals, Room Ambiance |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Diaphragm | 14 mm |
Polar Pattern | Supercardioid |
Orientation | End Address |
Circuitry | Solid-State |
Pad | None |
High-Pass Filter | 75 Hz 150 Hz |
Tone Adjustment | None |
Gain Adjustment | Up to +20 dB |
Indicators | Single LED (Power, Status) |
On-Board Controls | Gain/Sensitivity, High-Pass Filter, On/Off |
Windscreen | Foam (Included) |
Performance
Frequency Range | 50 Hz to 20 kHz |
Maximum SPL | 130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
Off-Axis Rejection | 3 dB at 60° 10 dB at 120° 15 dB at 180° |
Impedance | 200 Ohms |
Sensitivity | -24 dBV/Pa at 1 kHz |
Dynamic Range | 114 dB |
Signal-to-Noise Ratio | 84 dB |
THD | < 0.1% |
Connectivity
Output Connectors (Analog) | 1 x 1/8" / 3.5 mm TRRS Female (on Mic) |
Headphone Connector | None |
Power
Bus Power | None |
Operating Voltage | Not Specified by Manufacturer |
Operating Current Consumption | 6.3 mA (Battery Power) |
Battery Type | 1 x Built-In (Included) |
Battery Chemistry | Lithium-Ion |
Battery Capacity | 320 mAh |
Approximate Battery Life | 51 Hours |
Physical
Color | Black |
Mounting | 1/4"-20 Female, 3/8"-16 Female, Camera/Shoe-Mount, Shockmount (with Included Hardware) |
Included Case | None |
Included Filters | None |
Construction Material | Aluminum |
Storage Temperature | -10 to 70°C |
Certifications | CE, RoHS, as per Manufacturer |
Dimensions | ø: 21 x L: 189 mm |
Weight | 78 g (Microphone) 143 g (with Mount) |