Rode Stereo VideoMic Pro With Rycote Shock Mount
Choose PayGate at checkout for MobiCred Payments.
- Ideal for Video & DSLR Cameras
- Integrated Shoemount/Shockmount
- Level Switch: -10dB / 0dB / +20dB
- High-Pass Filter Switch: 75Hz
- Durable Multi-Strand Cable
- 1/8" (3.5mm) Output Connector
- 9V Battery Powered
Orms Bellville
Orms Cape Town
Rode Stereo VideoMic Pro With Rycote Shock Mount
Orms Bellville
Ground Floor, Tygervalley Chambers 2, 27 Willie Van Schoor Avenue
Bellville
Bellville
Western Cape
7530
South Africa
Orms Cape Town
Shop 5, Roeland Square, Roeland Street
Gardens
Cape Town
Western Cape
8001
South Africa
Choose options
Choose PayGate at checkout for MobiCred Payments.
- Ideal for Video & DSLR Cameras
- Integrated Shoemount/Shockmount
- Level Switch: -10dB / 0dB / +20dB
- High-Pass Filter Switch: 75Hz
- Durable Multi-Strand Cable
- 1/8" (3.5mm) Output Connector
- 9V Battery Powered
Choose PayGate at checkout for MobiCred Payments.
- Ideal for Video & DSLR Cameras
- Integrated Shoemount/Shockmount
- Level Switch: -10dB / 0dB / +20dB
- High-Pass Filter Switch: 75Hz
- Durable Multi-Strand Cable
- 1/8" (3.5mm) Output Connector
- 9V Battery Powered
The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design.
- Ideal for Video & DSLR Cameras
- Integrated Shoemount/Shockmount
- Level Switch: -10dB / 0dB / +20dB
- High-Pass Filter Switch: 75Hz
- Durable Multi-Strand Cable
- 1/8" (3.5mm) Output Connector
- 9V Battery Powered
The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design. The Stereo VideoMic's capsule feature a matched pair of 1/2" cardioid condenser capsules, mounted in a coincident X/Y position for accurate stereo imagery and detail. The microphone's small, ergonomic footprint features an integrated shock mounting system for superior isolation from vibration and mechanical noise. The multi-strand output cable is terminated with a 1/8" (3.5mm) output connector and delivers significantly lower noise transference than traditional audio cable.
The included shoe mount features an integrated shockmount system for even further protection against handling noise. The Stereo VideoMic features a high pass filter switch at 75Hz for minimizing low frequency noise, and a -10dB Pad for maximizing headroom for capturing loud signals without distortion. The +20dB level boost switch is specifically designed to provide a higher quality signal with DSLR cameras. When activated, camera preamp level is reduced, resulting in a lower noise floor and much clearer recording.
- Broadcast recording quality on-camera microphone
- Matched pair 1/2" condenser capsules in XY stereo configuration
- Ultra lightweight, compact form factor
- Two step High Pass Filter (flat, 75Hz)
- Three position level control (-10dB, 0, +20dB)
- 9V battery powered - over 100 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output
- Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting
- Rode Stereo VideoMic Pro Rycote
- Metal Camera Shoe Mount with 3/8" Thread
- Foam Windscreen
Transducer | Pressure Gradient, JFET impedance converter |
Polar Pattern | XY Cardioid (Coincident) |
Frequency Range | 40Hz ~ 20,000Hz (selectable HPF@75Hz) |
Output Impedance | 200Ω |
Maximum Output | +4.2dBu (@ 1% THD into 1kΩ) |
Power Supply | 9V alkaline battery |
Connection | 1/8" (3.5mm) stereo mini-jack |
SPL | 134dB, max (1 kHz, 1% THD into 1kΩ) |
Sensitivity | -38dB re 1V/P (12.6mV @ 94dB SPL) ±2dB @ 1kHz |
EIN | 20dBA SPL (A - weighted per IEC651) |
Dynamic Range | 100dB (per IEC651) |
Signal to Noise Ratio | 73dB SPL (A - weighted per IEC651) |
Dimensions | 66 x 108 x 130 mm |
Weight | 117 g (without battery) |