Rode

Rode Stereo VideoMic Pro With Rycote Shock Mount

R 6,595.00
R 6,595.00 R 6,595.00
Tax included. Shipping calculated at checkout.

RODSVMPR

Out of stock

Sorry, it's out of stock.

But we can let you know when it's back in.

SHORT DESCRIPTION

  • Ideal for Video & DSLR Cameras
  • Integrated Shoemount/Shockmount
  • Level Switch: -10dB / 0dB / +20dB
  • High-Pass Filter Switch: 75Hz
  • Durable Multi-Strand Cable
  • 1/8" (3.5mm) Output Connector
  • 9V Battery Powered
    The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design.

    The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design.

    • Ideal for Video & DSLR Cameras
    • Integrated Shoemount/Shockmount
    • Level Switch: -10dB / 0dB / +20dB
    • High-Pass Filter Switch: 75Hz
    • Durable Multi-Strand Cable
    • 1/8" (3.5mm) Output Connector
    • 9V Battery Powered

    The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design. The Stereo VideoMic's capsule feature a matched pair of 1/2" cardioid condenser capsules, mounted in a coincident X/Y position for accurate stereo imagery and detail. The microphone's small, ergonomic footprint features an integrated shock mounting system for superior isolation from vibration and mechanical noise. The multi-strand output cable is terminated with a 1/8" (3.5mm) output connector and delivers significantly lower noise transference than traditional audio cable.

    The included shoe mount features an integrated shockmount system for even further protection against handling noise. The Stereo VideoMic features a high pass filter switch at 75Hz for minimizing low frequency noise, and a -10dB Pad for maximizing headroom for capturing loud signals without distortion. The +20dB level boost switch is specifically designed to provide a higher quality signal with DSLR cameras. When activated, camera preamp level is reduced, resulting in a lower noise floor and much clearer recording.

    Broadcast recording quality on-camera microphone
    Matched pair 1/2" condenser capsules in XY stereo configuration
    Ultra lightweight, compact form factor
    Two step High Pass Filter (flat, 75Hz)
    Three position level control (-10dB, 0, +20dB)
    9V battery powered - over 100 hours use (alkaline)
    Integrated shock mounting
    Integrated foam windscreen
    3.5mm stereo mini-jack output
    Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting

      • Rode Stereo VideoMic Pro Rycote
      • Metal Camera Shoe Mount with 3/8" Thread
      • Foam Windscreen

      TransducerPressure Gradient, JFET impedance converter
      Polar PatternXY Cardioid (Coincident)
      Frequency Range40Hz ~ 20,000Hz (selectable HPF@75Hz)
      Output Impedance200Ω
      Maximum Output+4.2dBu (@ 1% THD into 1kΩ)
      Power Supply9V alkaline battery
      Connection1/8" (3.5mm) stereo mini-jack
      SPL134dB, max (1 kHz, 1% THD into 1kΩ)
      Sensitivity-38dB re 1V/P (12.6mV @ 94dB SPL) ±2dB @ 1kHz
      EIN20dBA SPL (A - weighted per IEC651)
      Dynamic Range100dB (per IEC651)
      Signal to Noise Ratio73dB SPL (A - weighted per IEC651)
      Dimensions66 x 108 x 130 mm
      Weight117 g (without battery)