Saramonic SR-VM4 Camera-Mount Shotgun Microphone
Choose PayGate at checkout for MobiCred Payments.
- Mobile Journalist, Vlogger, Run & Gun
- For Cameras and Portable Recorders
- 720-Hr Run Time via AA Batteries
- Gain and Bass Roll-Off
- Attached 3.5mm TRS Output Cable
- Power Switch with LED
- Lightweight ABS Construction
- Foam Windscreen and Furry Windshield
- Integrated Shoe Shockmount
Orms Bellville
Saramonic SR-VM4 Camera-Mount Shotgun Microphone
Orms Bellville
Ground Floor, Tygervalley Chambers 2, 27 Willie Van Schoor Avenue
Bellville
Bellville
Western Cape
7530
South Africa
The Saramonic SR-VM4 Camera-Mount Shotgun Microphone is designed to improve the capture of sound at a lower price point.
This microphone is mounted on your camera offering directional sound pickup with customizable settings. It also offers fast setup times for vloggers, news reporters, and on the run photographers. You will also find a furry, as well as a foam windshield for an effective shield from wind and unwanted noise from entering the capsule.
The Saramonic SR-VM4 Camera-Mount Shotgun Microphone is powered by two AA batteries (not included) and able to operate for up to 720 hours. There is an attached 3.5mm TRS mini plug for simple hookup to your camera or portable audio recorder.
Mounts on Camera
The Saramonic SR-VM4 Camera-Mount Shotgun Microphone features a integrated shock mount for attachment to your camera's shoe mount. This also provide isolation from vibration and mechanical noise.
Directional Sound Pickup
An condenser capsule in a interface tube, you will find a supercardioid polar pattern with focused pickup in front of the microphone. Increased rejection of sound is also offered to the sides.
Attached Coiled Pickup
An 3.5mm right angle TRS mini plug can be connected to the 3.5mm mic input on most cameras and portable audio recorders.
Powered via AA Batteries
The Saramonic SR-VM4 Camera-Mount Shotgun Microphone is powered by two AA batteries (not included) that will be able to power the mic for up to 720 hours.
When the battery power is high enough the light will glow green, and when running low the light will turn red.
Onboard Gain Control
Featuring on board gain control, enabling you to adjust the level of sound being picked u by the microphone.
Low-Cut Filter
on the power button of the Saramonic SR-VM4 Camera-Mount Shotgun Microphone you will find a button for activating 75Hz low-cut filter.
Included Wind Protection
In the box you will find a foam as well as furry windshield.
The foam windshield for indoor use, and the furry shield for outdoor use. All this for preventing unwanted noise from entering the microphone capsule.
- Saramonic SR-VM4 Camera-Mount Shotgun Microphone
- Foam Windscreen
- Furry Windshield
Microphone
Form Factor | Camera-Mount |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Polar Pattern | Supercardioid |
Orientation | End Address |
Circuitry | Solid-State |
Pad | None |
High-Pass Filter | 75 Hz |
Tone Adjustment | None |
Gain Adjustment | -10 to +20 dB |
Indicators | 1 x Green/Red Single LED (Battery, Power) |
On-Board Controls | Gain/Sensitivity, High-Pass Filter |
Windscreen | Foam, Windsock/Windjammer (Included) |
Performance
Frequency Range | 20 Hz to 20 kHz |
Impedance | 50 Ohms |
Sensitivity | -32 dBV/Pa at 1 kHz |
Signal-to-Noise Ratio | 80 dB |
Connectivity
Output Connectors (Analog) | 1 x 3.5 mm TRS Male (on Attached Cable) |
Headphone Connector | None |
Power
Operating Voltage | 3 V (Battery Power) |
Battery Type | 2 x AA (Not Included) |
Approximate Battery Life | 720 Hours |
Physical
Mounting | Camera/Shoe-Mount, Shockmount (via Integrated Hardware) |
Included Case | None |
Construction Material | ABS |
Operating Temperature | -20 to 60°C |
Dimensions | H: 10.8 x W: 5.4 x L: 23.9 cm |
Weight | 141 g |